Galvo Scanner/3 axes Sub-Surface Laser Engraving Machine STN YAG-702/702B

LASER SUBSURFACE ENGRAVING MACHINE

　Laser subsurface engraving machine is a high-tech product which is integrated with laser technology, electrical automatization, precise mechanical manufacturing and image processing software. Generally speaking, there are two ways to scan/move the laser beam: mechanical moving and galvanometer scanning. Scanning is most advanced and fastest for crystal subsurface engraving. Due to high energy of the focused laser beam, cracking or explosion may occur inside the crystal and a obvious point is formed. By moving the laser beam via a computer control system, 3D image can be created inside the crystal.
　A 3D camera can be used together with the machine to make individual 3D portrait engraving inside the crystal cube.
These machines are widely used in precious souvenir industry and craft & gift making.
　Our laser subsurface engraving machines have the following characteristics: firstly, take 3D photo of a person with 3D camera and process it in computer to form 3D portrait; secondly, utilizing laser focusing technology, it can engrave 3D everlasting portrait inside crystals. With the development of material life, people are paying more and more attention to the pursuance of spirituality and individuality.Therefore, with a broad market, the 3D subsurface engraved portraits are becoming more and more popular.you can buy a 5*5*8cm crystal cube at 1.5-2USD and sell the 3d head crystal products at 45-50USD each piece, It's very profitable to do the crystal business,

The technology of laser subsurface engraving machine has been greatly improved in recent years, sub-surface laser engraving is a completely new industry,the 2D/3D laser engraved crystal block has an enormous sales potential,
Many of our former clients have achieved great success in the US and Europe!

Working Principle: The green laser beam can penetrate the flat surface of crystal glass and then go inside, the laser focal point can burn the crystal glass, the laser subsurface engraving machine can laser any 2d/3d patterns,characters and heads/portraits into crystal blocks, the gift article has a value of appreciating and commemorating,by working with 3d camera, the machine can print 3d head into crystal cube, the 3d portrait looks very animated,

Features:enclosed laser engraving,Class IV laser products,it's quite safe to users,Our laser subsurface engraving machines are built strictly as per the CE standards,they are in compliance with the essential safety and health requirements of the machinery directive,Low Voltage Directive and Electromagnetic Compatibility Directive,they are based on the following standards:
ISO 11553:1996,EN 60204-1:1998,IEC 60825-1:1993,EN 60825-4:1997;EN 61000-6-1:2001;EN 61000-6-3:2001;EN 61000-4-2:1995
EN 61000-4-3:1995;EN 61000-4-4:1995;EN 61000-4-5:1995;EN 61000-4-6:1995;EN 61000-4-11:1994;EN 61000-3-2:1994
CISPR 16-2:1996
Applicable EC Directives: 98/37/EC Machinery directive;73/23/EEC Low Voltage Directive;89/336/EEC Electromagnetic Compatibility Direcive,

Technical index of circulating water cooler

The machine installation condition:

1.Power source: 110V or220V/50/60Hz, Single phase;or 380V,50Hz/60Hz,three phases four wires,
2.Ambient temperature for working: 5--35 degrees
3.Relative humidity ≤75%( non-cohere)
4.Working circumstance: cleansing, comparatively no dirt,

The characteristic of the whole machine:

1.high dependability; long continuous working time; high engraving speed;
2.particular graphics processing function
3.luxuriant software, which can be used for making various of solid patterns.
4.non-contact processing method, keeping the crystal intrinsic luminosity

The whole machine includes 3D controller system, computer controller system, 3D worktable, laser power, laser routes and cooling system.

Supply scope : Main machine, cooling machine,computer,full set of software,3d design library, manual,spare parts,a pair of protective glasses,paper cylinder for water filter(this device is used for absorbing the dirt in the water,so you do not need to change the water and clean the laser lamp very frequently),

Quotation for the machine includes all hardware and engraving softwares, computer system (Pentium IV CPU, 512MB RAM 80GB harddisk), English version manual for installing and operating step by step.

The pictures and specification of the machine is only for reference. the information is subject to change without prior notice.